Set of aviation snips

Product details
  • Edges with micro-serrations for prevent slipping
  • D16/D16L: For short, straight and curved cuts
  • D16S: No offset to blades, for short, straight and curved cuts with a large radius in both left and right directions
Order number Layout Weight
kg
DSET16 1 x D16, 1 x D16L and 1 x D16S in snips pouch 1.23
  • Manual sheet metal snips may only be used to cut thin sheets of soft metals or steel. They are not suitable for cutting through round or rectangular section metal shapes such as wires.
  • Cutting tools may only be used manually without using any auxiliary tools.
  • Always wear safety goggles and gloves when working. Cut parts can injure workers and bystanders.
  • Improper use can cause personal injuries or material damage.
  • Disconnect the connection to the power supply when carrying out work on electrical equipment. Otherwise, you may get an electric shock.
  • Always cut away from the head when using snips and knives.
  • Always store cutting tools with the cutting edges closed and in a location where they are clearly visible. The handle must be pointing towards you.
  • Store cutting tools separately. This saves the cutting edges and your fingers.
  • Sharpen cutting tools regularly. Blunt tools increase the risk of injury and require more force for the same cutting performance.
  • Clean the rails with solvent
  • Rub the cutting edge with a lightly oiled cloth (remove material dust) in regular cycles, depending on the degree of soiling
  • Regularly oil the screw connections on the inside of the blade
  • Rusty or scratched cutting edge, gently scrape it off with an oil stone
  • If the snips exhibit too much play, adjust the screw. (It must still be possible to open and close the shears easily)