Shape and straight cutting snips
| Order number | Overall length | Overall length | Blade length | Blade length | Product life expectancy | Weight |
| mm | " | mm | " | kg | ||
|---|---|---|---|---|---|---|
| D39ASS | 230 | 9 | 30 | 1 3/16 | +++ | 0.49 |
| D39ASSL | 230 | 9 | 30 | 1 3/16 | +++ | 0.49 |
| D39ASS-SB | 230 | 9 | 30 | 1 3/16 | +++ | 0.5 |
| D39ASSL-SB | 230 | 9 | 30 | 1 3/16 | +++ | 0.5 |
Frictionless robust
The shape and straight cutting snips D39ASS are particularly smooth running and extremely wear-resistant:
- due to sintered steel insert in the joint area
- due to permanent threaded connection of the joint area with stable stud bolt
- due to stainless steel panel over the joint for protecting the spring beneath
Perfect cornering
They enable high-precision cutting of curves in the tightest of radii and, with less risk of scratching the surface:
- due to extremely compact cutter head with partially sunken threaded head connection
Effort-saving
It is possible to use the complete cutting length with every cut:
- due to a significantly reduced handle opening angle
Easy to use
Right and left-handed users can lock and unlock the snips with ease, without a change in grip.
- due to central positioning of the latch on the top handle
- Metal construction
- Plumbing
- Manual sheet metal snips may only be used to cut thin sheets of soft metals or steel. They are not suitable for cutting through round or rectangular section metal shapes such as wires.
- Cutting tools may only be used manually without using any auxiliary tools.
- Always wear safety goggles and gloves when working. Cut parts can injure workers and bystanders.
- Improper use can cause personal injuries or material damage.
- Disconnect the connection to the power supply when carrying out work on electrical equipment. Otherwise, you may get an electric shock.
- Always cut away from the head when using snips and knives.
- Always store cutting tools with the cutting edges closed and in a location where they are clearly visible. The handle must be pointing towards you.
- Store cutting tools separately. This saves the cutting edges and your fingers.
- Sharpen cutting tools regularly. Blunt tools increase the risk of injury and require more force for the same cutting performance.
- Shears head made of forged steel, burnished
- Shears handles made of 2-component plastic with sheet metal part
- Connecting elements made of steel, galvanised or burnished
- Clean the rails with solvent
- Rub the cutting edge with a lightly oiled cloth (remove material dust) in regular cycles, depending on the degree of soiling
- Regularly oil the screw connections on the inside of the blade
- Rusty or scratched cutting edge, gently scrape it off with an oil stone
- If the snips exhibit too much play, adjust the screw. (It must still be possible to open and close the shears easily)
