Horizontal fixture clamp WNS‑SET‑MFT
Product details
- Clamping force up to 750 N
- For using on multifunction tables such as Festool MFT and Sortimo WorkMo with hole diameter of 20 mm and plate thickness of min. 19 mm
- Quick fixing thanks to clamping levers on the side
- Makes full-surface working of the workpiece possible – even round and flat parts
- Patented pull-down mechanism prevents the workpiece from lifting from the table surface when clamping – even without fastening screws
- Bench dog BH-MFT can also be used as a universal limit stop for workpieces
| Order number | Bolt | Content | Weight |
| mm | kg | ||
|---|---|---|---|
| WNS-SET-MFT | Ø20 | 2 x horizontal fixture clamp / 2 x bench dog / 4 x knurled nut | 0.92 |
- Interior fittings
- DIY
- Furniture and joinery works
- For use on multifunctional tables
- Clamping tools are not suitable for lifting, pulling or transporting.
- Clamping tools may only be clamped manually without using any auxiliary tools.
- Improper use can cause personal injuries or material damage.
- Never change or modify clamping tools. Only use them in their original condition. Only use original‐spare parts if required.
- Upper and lower section made of reinforced PA6 plastic
- Rail made of hardened steel, burnished
- Lever made of reinforced PA6 plastic
- Connecting elements made of steel, galvanised or burnished
- Clean the rails with solvent
- Always keep the rail free of grease, oil or dried glue, waxes and silicone-based release agents
- Clean in regular cycles, depending on the degree of soiling
