High‑performance clamp STBS
Product details
- Clamping force up to 35,000 N at tightening torque of 100 Nm
- Long life due to heat‐resistant pressure plate with sintered steel insert, which can be tilted up to 35°
- With 36 mm hexagonal bolt on the end of the spindle
- With wedge for fixing the sliding arm
| Order number | Opening | Throat depth | Rail | Weight |
| mm | mm | mm | kg | |
|---|---|---|---|---|
| STBS30 | 300 | 200 | 50x25 | 10.46 |
| STBS50 | 500 | 200 | 50x25 | 12.17 |
| STBS100 | 1000 | 200 | 50x25 | 16.68 |
- Metal construction
- Locksmith work
- High-performance clamping
- Clamping tools are not suitable for lifting, pulling or transporting.
- Clamping tools may only be clamped manually without using any auxiliary tools.
- Improper use can cause personal injuries or material damage.
- Never change or modify clamping tools. Only use them in their original condition. Only use original‐spare parts if required.
- Fixed and sliding bracket made of tempered steel, galvanised
- Spindle with trapezoidal thread in tempered, rolled steel, phosphated
- Toggle made of steel, galvanised
- Pressure plate made of steel, phosphated
- Regular maintenance is necessary - only then can a secure hold be guaranteed (no slipping of the sliding bracket)
- Clean the rails with solvent
- Always keep the rail free of grease, oil or dried glue, waxes and silicone-based release agents
- Clean and oil the spindle regularly
- If the rail is shiny, roughen both narrow sides with emery cloth (100 grain)
- Clean and oil the pressure plate regularly
