All‑steel table clamp GTR
Product details
- Specially forged fixed arm for 12 x 8 mm grooves
- For secure fastening of guide rails from Festool, Protool, Metabo, Makita, Hitachi/Hikoki, etc. and for clamping in profiles as well as work tables
- Clamping force up to 1,800 N
- Ergonomically shaped wooden handle
- GTR12SET: On carded hang pack
| Order number | Opening | Throat depth | Rail | Content | Weight |
| mm | mm | mm | kg | ||
|---|---|---|---|---|---|
| GTR12 | 120 | 60 | 13,5x6,5 | – | 0.3 |
| GTR12SET | 120 | 60 | 13,5x6,5 | 2 x GTR12 | 0.61 |
| GTR16B6 | 160 | 60 | 13,5x6,5 | – | 0.32 |
| GTR30B6 | 300 | 60 | 13,5x6,5 | – | 0.4 |
- Interior fittings
- DIY
- Furniture and joinery works
- Kitchen construction and shop fitting
- Secure guide rails and clamp in profiles
- Clamping tools are not suitable for lifting, pulling or transporting.
- Clamping tools may only be clamped manually without using any auxiliary tools.
- Improper use can cause personal injuries or material damage.
- Never change or modify clamping tools. Only use them in their original condition. Only use original‐spare parts if required.
- Fixed and sliding bracket made of tempered steel, galvanised
- Spindle with trapezoidal thread in rolled steel, burnished
- Handle made of wood, water-based paint
- Pressure plate made of steel, cold pressed, galvanised
- Regular maintenance is necessary - only then can a secure hold be guaranteed (no slipping of the sliding bracket)
- Clean the rails with solvent
- Always keep the rail free of grease, oil or dried glue, waxes and silicone-based release agents
- Clean and oil the spindle regularly
- If the rail is shiny, roughen both narrow sides with emery cloth (100 grain)
- Clean and oil the pressure plate regularly
