Area pressure clamps FK
Product details
- Clamping force up to 5,000 N
- 2 large, tilting jaw faces
- For workpieces with a sloping contact surface
- Large-area clamping of all workpieces from both sides
| Order number | Opening | Throat depth | Rail | Weight |
| mm | mm | mm | kg | |
|---|---|---|---|---|
| FK16-8 | 160 | 80 | 16x7,5 | 0.6 |
| FK20-10 | 200 | 100 | 19,5x9,5 | 1.1 |
| FK40-10 | 400 | 100 | 19,5x9,5 | 1.4 |
- Interior fittings
- DIY
- Furniture and joinery works
- Large-area clamping and spreading
- Clamping tools are not suitable for lifting, pulling or transporting.
- Clamping tools may only be clamped manually without using any auxiliary tools.
- Improper use can cause personal injuries or material damage.
- Never change or modify clamping tools. Only use them in their original condition. Only use original‐spare parts if required.
- Fixed and sliding bracket made of tempered steel, galvanised
- Spindle with trapezoidal thread in rolled steel, burnished
- Handle made of wood, water-based paint
- Pressure plate made of steel, cold pressed, galvanised
- Protective caps made of plastic
- Regular maintenance is necessary - only then can a secure hold be guaranteed (no slipping of the sliding bracket)
- Clean the rails with solvent
- Always keep the rail free of grease, oil or dried glue, waxes and silicone-based release agents
- Clean and oil the spindle regularly
- If the rail is shiny, roughen both narrow sides with emery cloth (100 grain)
- Clean and oil the pressure plate regularly
