Deep throat clamp TGNT with tried‐and‐true wooden handle
Product details
- Clamping force up to 7,000 N
- Heavy-duty design
- Ergonomically shaped wood handle
- Large, stable solid flat rail with serration
- Rail dimensions great than and equal to 40 x 11 are ungalvanized
| Order number | Opening | Throat depth | Rail | Weight |
| mm | mm | mm | kg | |
|---|---|---|---|---|
| TGN30T20 | 300 | 200 | 35x11 | 3.11 |
| TGN40T20 | 400 | 200 | 35x11 | 3.36 |
| TGN60T20 | 600 | 200 | 35x11 | 3.91 |
| TGN80T20 | 800 | 200 | 35x11 | 4.48 |
| TGN100T20 | 1000 | 200 | 35x11 | 4.65 |
| TGN40T25 | 400 | 250 | 40x11 | 4.42 |
| TGN60T25 | 600 | 250 | 40x11 | 5.06 |
| TGN80T25 | 800 | 250 | 40x11 | 5.71 |
| TGN100T25 | 1000 | 250 | 40x11 | 6.34 |
| TGN40T30 | 400 | 300 | 45x12 | 5.55 |
| TGN60T30 | 600 | 300 | 45x12 | 6.31 |
| TGN80T30 | 800 | 300 | 45x12 | 7.11 |
| TGN100T30 | 1000 | 300 | 45x12 | 7.94 |
| TGN150T30 | 1500 | 300 | 45x12 | 10 |
| TGN200T30 | 2000 | 300 | 45x12 | 11.97 |
| TGN250T30 | 2500 | 300 | 45x12 | 13.96 |
| TGN40T40 | 400 | 400 | 45x12 | 6.7 |
| TGN60T40 | 600 | 400 | 45x12 | 7.45 |
| TGN80T40 | 800 | 400 | 45x12 | 8.27 |
| TGN100T40 | 1000 | 400 | 45x12 | 9.22 |
| TGN30T50 | 300 | 500 | 45x12 | 7.97 |
| TGN60T50 | 600 | 500 | 45x12 | 9.17 |
| TGN80T50 | 800 | 500 | 45x12 | 9.96 |
- Interior fittings
- Shell construction
- Furniture and joinery works
- Kitchen construction and shop fitting
- Carpentry and woodwork
- Powerful and rigid clamping
- Clamping tools are not suitable for lifting, pulling or transporting.
- Clamping tools may only be clamped manually without using any auxiliary tools.
- Improper use can cause personal injuries or material damage.
- Never change or modify clamping tools. Only use them in their original condition. Only use original‐spare parts if required.
- Upper and lower section made of zinc die-cast, powder-coated
- Hollow profile rail made of steel, cold-drawn, galvanised
- Spindle with trapezoidal thread in rolled steel, burnished
- Handle made of wood, water-based paint
- Pressure plate made of steel, cold pressed, galvanised
- Regular maintenance is necessary - only then can a secure hold be guaranteed (no slipping of the sliding bracket)
- Clean the rails with solvent
- Always keep the rail free of grease, oil or dried glue, waxes and silicone-based release agents
- Clean the fluting on the rails with a steel brush
- Clean and oil the spindle regularly
- If the lower part slips, turn the grub screw a 1/4 turn further (TG, KRE, KREV only)
- Clean and oil the pressure plate regularly
